卷簾門是一種具有保溫、防風、防塵、隔音、防火、防異味等功能適用于物流通道，大面積洞口，防風要求較高等內外門的工業門。長期使用卷簾門很久時間后，可能會出現卷簾門的門簾不停的不斷上下的現象，只能使用急停功能或者手動功能才能讓卷簾門的門簾停止。那么該如何解決這類情況呢？濟南卷簾門廠馬上為您講解一下。

Rolling shutter door is an industrial door with functions of heat preservation, wind protection, dust prevention, sound insulation, fire prevention, odor prevention, etc. It is applicable to logistics channels, large openings, and internal and external doors with higher wind protection requirements. After using the roller shutter for a long time, the shutter of the roller shutter may keep moving up and down. Only the emergency stop function or manual function can stop the shutter of the roller shutter. So how to solve this kind of situation? Jinan Rolling Door Factory will explain it to you right away.

卷簾門門簾出現故障的原因可能是雷達的固定處不牢固，在長期震動門體的情況下，就可能會出現雷達發射區移位導致感應區照射到門簾才出現不斷上下的情況?；蛘呤抢走_的靈敏度調節的太高，因為卷簾門的門體運行過程中發生輕微的震動是無可避免的，如果靈敏度太高，可能余震會讓雷達感應出來，才會導致門簾無法關閉。

The reason for the failure of the roller shutter door curtain may be that the fixed position of the radar is not firm. When the door body is vibrated for a long time, the radar transmission area may shift, causing the sensor area to shine on the door curtain, and then it will rise and fall continuously. Or the sensitivity of the radar is adjusted too high, because it is inevitable that the door body of the roller shutter will vibrate slightly during operation. If the sensitivity is too high, aftershocks may be sensed by the radar, which will cause the door curtain to fail to close.

那么卷簾門的不停上下故障如果是配件松動只需要把雷達固定好然后調節下雷達感應區就可以解決。感應度太靈敏只需要把小型螺絲刀對雷達的靈敏度按鈕進行調節。如果發現安裝的卷簾門故障嚴重，那么一定要及時安排卷簾門廠家的維修人員上門處理，避免損壞門體和影響卷簾門的正常使用。

If the rolling shutter door fails to move up and down all the time, just fix the radar and adjust the lower radar sensing area to solve the problem. The sensitivity is too sensitive. Just use a small screwdriver to adjust the sensitivity button of the radar. If it is found that the installed roller shutter door has serious faults, the maintenance personnel of the roller shutter door manufacturer must be timely arranged to handle the problems on site to avoid damaging the door body and affecting the normal use of the roller shutter door.

保養方法和要求：

Maintenance methods and requirements:

1.保養人員應由人員組成，保養工作須由經驗豐富、熟悉地鐵情況的技術人員檢查。保養人員不應任意變動。

1. The maintenance personnel shall be composed of personnel, and the maintenance work shall be checked by experienced technicians who are familiar with the subway. The maintenance personnel shall not change at will.

2.普通卷簾門、防火卷簾門、工業提升門、電動伸縮門、拉閘門、電動感應門在各分項保養作業后須進行整體運行、檢查、調試正常。

2. The general rolling shutter door, fire rolling shutter door, industrial lifting door, electric telescopic door, sliding gate and electric sensing door must be operated, inspected and debugged normally after the maintenance of each item.

3.現場保養工作結束后需做到人員、工具清，并做好相應保養實施記錄。

3. After the on-site maintenance is completed, the personnel and tools shall be cleared, and the corresponding maintenance implementation records shall be made.

卷簾門的門簾出現故障原因及解決方法，安裝快速卷簾門對后期的使用會有很大的幫助，選擇有實力的廠家更能夠保障產品質量，避免后期浪費資源。歡迎大家關注我們網站http://www.shaulmediation.com，以此來了解更多卷簾門信息！

The reasons and solutions for the failure of the shutter of the roller shutter door. The installation of the fast roller shutter door will be very helpful for the later use. Selecting a strong manufacturer can better ensure the product quality and avoid wasting resources in the later period. Welcome to our website http://www.shaulmediation.com To learn more about roller shutter doors!