<p id="ttrrv"><cite id="ttrrv"></cite></p>
<track id="ttrrv"><strike id="ttrrv"></strike></track>

<pre id="ttrrv"><mark id="ttrrv"></mark></pre>
    <pre id="ttrrv"><del id="ttrrv"></del></pre><p id="ttrrv"></p>
    <pre id="ttrrv"></pre>

      <noframes id="ttrrv"><del id="ttrrv"><b id="ttrrv"></b></del>
            <p id="ttrrv"></p><p id="ttrrv"></p><p id="ttrrv"></p>

            歡迎光臨濟南市天橋區昌達卷簾門加工部官網!

            聯系我們 收藏本站 在線留言

            新聞資訊

            首頁>>新聞資訊>>鋁合金卷簾門的安裝也會存在防火性能
            新聞資訊
            聯系我們
            濟南市天橋區昌達卷簾門加工部

            聯系人:劉經理

            電話:15953131568

            網址:http://www.shaulmediation.com

            地址:濟南市天橋區金牛建材市場

            鋁合金卷簾門的安裝也會存在防火性能

            來源:http://www.shaulmediation.com 日期:2022-08-06 發布人:hongshun
            鋁合金卷簾門越來越受到用戶的追捧,普遍適用于車庫門、商鋪門、銀行大門、陽臺窗等地,鋁合金卷簾門好嗎?下面一起來來看一下鋁合金卷簾門的安裝也會存在防火性能是怎樣的吧。
            Aluminum alloy roller shutter doors are more and more popular with users. They are generally applicable to garage doors, shop doors, bank doors, balcony windows and other places. Is aluminum alloy roller shutter door good? Let's take a look at the fire performance of the installation of aluminum alloy roller shutter doors.
            1.鋁合金卷簾相鄰簾板串接后應轉動靈活,擺動90°不應脫落。鋁合金卷簾的簾板裝配完畢后應平直,不應有孔洞或縫隙。鋁合金卷簾板兩端擋板或防竄機構應裝配牢固,卷簾運行時,相鄰簾板竄動量不應大于2mm。無機纖維復合鋁合金卷簾面兩端應安裝防風鉤。無機纖維復合鋁合金卷簾面應通過固定件與卷軸相連。
            1. The aluminum alloy roller shutter shall rotate flexibly after the adjacent curtain plates are connected in series, and shall swing 90 ° without falling off. The curtain plate of aluminum alloy roller shutter shall be straight after assembly without holes or gaps. The baffles or anti channeling mechanisms at both ends of the aluminum alloy roller shutter shall be firmly assembled. When the roller shutter operates, the channeling amount of the adjacent shutter shall not be greater than 2mm. Wind hooks shall be installed at both ends of inorganic fiber composite aluminum alloy roller blind. The inorganic fiber composite aluminum alloy roller blind shall be connected with the roller shaft through a fixed piece.
            2.鋁合金卷簾板或簾面嵌入導軌的深度應符合規范規定,卷簾安裝后不應變形。導軌頂部應成圓弧形,其長度應保證卷簾正常運行。導軌的滑動面應光滑、平直。簾片或簾面、滾輪在導軌內運行時應平穩順暢,不應有碰撞和沖擊現象。
            2. The depth of aluminum alloy roller shutter plate or curtain surface embedded in the guide rail shall meet the specifications, and the roller shutter shall not be deformed after installation. The top of the guide rail shall be in arc shape, and its length shall ensure the normal operation of the roller shutter. The sliding surface of the guide rail shall be smooth and straight. The curtain sheet or curtain surface and roller shall run smoothly in the guide rail without collision and impact.
            單簾面卷簾的兩根導軌應互相平行,雙簾面卷簾不同簾面的導軌也應互相平行,其平行度誤差均不應大于5mm。卷簾的導軌安裝后相對于基礎面的垂直度誤差不應大于1.5mm/m,全長不應大于20mm。
            The two guide rails of single curtain roller shutter shall be parallel to each other, and the guide rails of different curtain surfaces of double curtain roller shutter shall also be parallel to each other, and the parallelism error shall not be greater than 5mm. After the installation of the guide rail of the roller shutter, the perpendicularity error relative to the foundation surface shall not be greater than 1.5mm/m, and the total length shall not be greater than 20mm.
            卷簾的防煙裝置與簾面應均勻緊密貼合,其貼合面長度不應小于導軌長度的80%。鋁合金卷簾的導軌應安裝在建筑結構上,并應采用預埋螺栓、焊接或膨脹螺栓連接。導軌安裝應牢固,固定點間距應為600mm~1000mm。
            The smoke prevention device of the roller shutter and the curtain surface shall be uniformly and closely bonded, and the length of the bonding surface shall not be less than 80% of the length of the guide rail. The guide rail of aluminum alloy roller shutter shall be installed on the building structure and shall be connected by embedded bolts, welding or expansion bolts. The guide rail shall be firmly installed, and the distance between fixed points shall be 600mm ~ 1000mm.
            3.鋁合金卷簾座板與地面應平行,接觸應均勻。座板與簾板或簾面之間的連接應牢固。無機復合鋁合金卷簾的座板應保證簾面下降順暢,并應保證簾面具有適當懸垂度。
            3. The aluminum alloy roller blind base plate shall be parallel to the ground and the contact shall be uniform. The connection between base plate and curtain plate or curtain surface shall be firm. The base plate of inorganic composite aluminum alloy roller shutter shall ensure smooth lowering of the curtain surface and proper sag of the curtain surface.
            4.門楣安裝應牢固,固定點間距應為600mm~1000mm。門楣內的防煙裝置與卷簾板或簾面表面應均勻緊密貼合,其貼合面長度不應小于門楣長度的80%,非貼合部位的縫隙不應大于2mm。
            4. The lintel shall be firmly installed, and the spacing between fixing points shall be 600mm ~ 1000mm. The smoke prevention device in the lintel shall be uniformly and closely bonded with the roller shutter plate or curtain surface, and the length of the bonding surface shall not be less than 80% of the lintel length, and the gap at the non bonding part shall not be more than 2mm.
            濟南卷簾門廠
            5.卷軸與支架板應牢固地安裝在混凝土結構或預埋鋼件上。卷軸在正常使用時的撓度應小于卷軸的1/400。
            5. The reel and support plate shall be firmly installed on the concrete structure or embedded steel parts. The deflection of the reel in normal use shall be less than 1 / 400 of the reel.
            6.濟南卷簾門廠認為卷門機應按產品說明書要求安裝,且應牢固可靠。卷門機應設有手動拉鏈和手動速放裝置,其安裝位置應便于操作,并應有明顯標志。手動拉鏈和手動速放裝置不應加鎖,且應采用不燃或難燃材料制作。
            6. Jinan rolling door factory believes that the rolling door machine shall be installed according to the requirements of the product manual and shall be firm and reliable. The door rolling machine shall be equipped with manual zipper and manual quick release device. The installation position shall be convenient for operation and shall have obvious marks. Manual zippers and manual quick release devices shall not be locked and shall be made of non combustible or non combustible materials.
            7.防護罩尺寸的大小應與鋁合金卷簾洞口寬度和卷簾卷起后的尺寸相適應,并應保證卷簾卷滿后與防護罩仍保持一定的距離,不應相互碰撞。防護罩靠近卷門機處,應留有檢修口。防護罩的耐火性能應與鋁合金卷簾相同。
            7. The size of the protective cover shall be compatible with the opening width of the aluminum alloy roller shutter and the size after the roller shutter is rolled up, and it shall be ensured that the roller shutter still keeps a certain distance from the protective cover after being rolled up, and shall not collide with each other. An access hole shall be reserved at the place where the protective cover is close to the door rolling machine. The fire resistance of the protective cover shall be the same as that of the aluminum alloy roller shutter.
            此外鋁合金卷簾門具有很好的抗老化功能,且耐腐蝕性強,同時還具有出色的抗擊打性能,所以它被廣泛安裝,您有定制需求就來我們網站http://www.shaulmediation.com咨詢吧。
            In addition, the aluminum alloy roller shutter door has good anti-aging function, strong corrosion resistance, and excellent anti-corrosion performance, so it is widely installed. If you have customized needs, please come to our website http://www.shaulmediation.com Consult.

            推薦閱讀/ Recommended reading

            對于我們來說卷簾門經常用來停放車庫等,不過卷簾門也時常會發生問題,比如卷簾門接通電源所有功能皆不能動作。下面濟南卷簾門廠為您進行解

            鋁合金卷簾門不能快速運行怎么辦 2022-12-22
            卷簾門的使用優勢及遇到問題該如何解決 2022-12-20
            查看問題時先看卷簾門有沒有施加作用 2022-12-17
            防火卷簾門維修常見故障及處置方式 2022-12-14

            【本站圖片均由網站所有方提供,部分圖片來源于網絡,如無意中侵犯了某媒體或個人的知識產權,請來信或來電告之,本網站將立即刪除?!?/p>

            • 宏順卷簾門
            欧美日韩国产

            <p id="ttrrv"><cite id="ttrrv"></cite></p>
            <track id="ttrrv"><strike id="ttrrv"></strike></track>

            <pre id="ttrrv"><mark id="ttrrv"></mark></pre>
              <pre id="ttrrv"><del id="ttrrv"></del></pre><p id="ttrrv"></p>
              <pre id="ttrrv"></pre>

                <noframes id="ttrrv"><del id="ttrrv"><b id="ttrrv"></b></del>
                      <p id="ttrrv"></p><p id="ttrrv"></p><p id="ttrrv"></p>