卷簾門廠家在對卷簾門安裝過程中，為了確保安裝工作進行順利，會對卷簾門的各部分的裝配精度提出相應的要求。哪些因素會影響卷簾門的裝配精度呢？下面就讓濟南卷簾門廠廠家為大家講講吧。

　　In the installation process of the rolling shutter door, the rolling shutter door manufacturer will put forward corresponding requirements for the assembly accuracy of all parts of the rolling shutter door in order to ensure that the installation work goes smoothly. What factors will affect the assembly accuracy of rolling shutter doors? Now let the Ji 'nan rolling shutter door factory tell you about it.

　　無論什么樣的門體都需要與各種五金配件進行組裝，卷簾門也是如此。五金配件的誤差會影響卷簾門的裝配精度。做好以下3點，可以大大提高卷簾門設備的精度！

　　No matter what kind of door body needs to be assembled with all kinds of hardware accessories, so does rolling shutter door. The error of hardware fittings will affect the assembly accuracy of rolling shutter doors. Do the following three points, can greatly improve the accuracy of rolling shutter door equipment!

　　對于各種五金配件和零件的質量，我們尤其需要注意關鍵零件的加工精度。

　　For all kinds of hardware accessories and parts of the quality, we especially need to pay attention to the machining accuracy of key parts.

　　另外，卷簾門零件在加工裝配中的變形對卷簾門的裝配精度也有很大的影響，所以裝配方法也很重要。那么在實際操作中，要盡可能在裝配中通過匹配、調整、修理等手段來提高裝配精度，從而保證卷簾門設備的整體質量。

　　In addition, the deformation of rolling shutter door parts in processing and assembly also has a great impact on the assembly accuracy of rolling shutter doors, so the assembly method is also very important. So in practical operation, we should improve the assembly accuracy as far as possible in the assembly by matching, adjusting, repairing and other means, so as to ensure the overall quality of the rolling shutter door equipment.

　　還有卷簾門零件之間的配合和接觸的質量，特別是抗震性以及剛度。只有將零件之間的配個面的接觸剛度提高了，才能夠有可能實現設備裝配精度的提高。

　　There is also the quality of coordination and contact between rolling shutter door parts, especially the earthquake resistance and stiffness. Only by improving the contact stiffness of the matching surface between parts can it be possible to improve the assembly accuracy of equipment.

　　另外，卷簾門在使用過程中會出現一些問題，所以需要平常多加保養，比如每周清潔門頁，可使門的表面美觀整潔，延長使用壽命。日常過程中特別注意不要用尖銳的儀器刮擦窗簾，并定期進行季度保養。

　　In addition, there will be some problems in the use of the rolling shutter door, so it needs to be maintained more often, such as cleaning the door page every week, which can make the surface of the door beautiful and clean and prolong the service life. In the daily process, special attention should be paid not to use sharp instruments to scrape the curtain, and regular quarterly maintenance.

　　濟南卷簾門廠認為存在的相關故障也要多加注意，比如當使用時出現電源故障時，首先要做的是按住緊急停止按鈕。然后進行卷簾門的維護工作。如果長時間不使用，需要將卷簾門提升到高位置，并斷開電源，以保證延長使用壽命。

　　Ji 'nan rolling shutter door factory thinks that the existence of relevant faults should also pay more attention to, such as when using the power failure, the first thing to do is to hold down the emergency stop button. Then carry out the maintenance work of the rolling shutter door. If it is not used for a long time, it is necessary to lift the rolling shutter door to a high position and disconnect the power supply to ensure extended service life.

　　卷簾門使用時上升速率越快越好，特別注意的是在快到達間距頂部時，要設置使用降速緩存終止的過程，能夠合理的避免快速卷門撞擊到門軌，避免卷簾門出現夾人的事故，具有運行平穩、減少噪聲等作用。

　　When the curtain door is used, the faster the rising rate is, the better. Special attention is paid to the process of using the deceleration cache to set up the termination of the fast door when the top of the distance is reached, which can reasonably avoid the fast door hitting the door rail, avoid the accident of the curtain door clamping, and has the function of running smoothly and reducing noise.

　　哪些因素會影響卷簾門的裝配精度呢？以上便是問題的相關內容了，此外我們還了解了卷簾門的保養以及故障處理問題，所以要想更好使用卷簾門就要多多去了解它。更多內容就來網站www.shaulmediation.com咨詢吧！

　　What factors will affect the assembly accuracy of rolling shutter doors? The above is the related content of the problem. In addition, we also know the maintenance and troubleshooting problems of the rolling shutter door, so in order to better use the rolling shutter door, we should learn more about it. More content to the website www.shaulmediation.com consultation!