1. Merchants should also consider the selection of lightweight, durable materials, so that even in special circumstances can play a higher security issues.

2、門簾在開閉的同時，嚴禁行人及奔跑，因為門簾在開閉的時候門簾是通過聯片連接的，而電機和傳動軸也是存在極少的不安全因素。所以門簾在啟動的時候應該盡量不要有人跑動。

2. When the curtain is opened and closed, pedestrians and running are strictly prohibited, because the curtain is connected by a piece when opening and closing, and there are few unsafe factors in the motor and drive shaft. So the curtain should try not to run when it starts.

濟南卷簾門廠

Jinan rolling shutter door factory

3、卷簾門在上下啟閉的時候查看清楚是否有堆物，特別是防火卷簾門是和消防系統聯動的，經常會因為操作不當導致防火卷簾門損壞，或傾斜。而普通的電動卷簾門也應該特別注意，門簾在開閉的同時應該人在現場，萬一出現門簾傾斜或者軌道卡位應該及時停止門簾開閉，這樣才不會給電機和門簾造成更大的傷害。

3. When the fire door is closed or the fire shutter is not properly operated, it is necessary to check whether the shutter is damaged or not. And the ordinary electric rolling shutter door should also pay special attention to, the curtain should be opened and closed at the same time, in case of curtain tilt or track jam, the curtain opening and closing should be stopped in time, so as not to cause greater damage to the motor and curtain.

4、卷簾門電機的選購也是比較重要的一個環節，切記不要感覺提升力夠用就行，因為卷簾門電機的承載力會隨著時間的推移，會慢慢的降低實際的提升功效，所以選材方面盡量的要超過門簾的實際提升力。

4. The purchase of rolling shutter door motor is also a more important link. Remember not to feel that the lifting force is enough, because the bearing capacity of rolling shutter door motor will gradually reduce the actual lifting effect as time goes on, so the material selection should exceed the actual lifting capacity of the curtain.

5、品牌也是選擇一個濟南卷簾門企業不可或缺的的因素，很多商家會去選擇低價位，低品質的私人小作坊來制作，當然確實是降低了成本，但是反正很多小加工場為了降低制作成本，一味的降低配件材質，在安裝的同時質量上根本沒辦法得到相應的保障，還有維修也是如此，當客戶付清全額貨款以后很多生產廠家因為成本計算額超標會選擇不給客戶維護，所以說選擇什么樣的商家也是很重要的。

5. Brand is also an indispensable factor in choosing a rolling shutter door enterprise in Jinan. Many businesses will choose low-cost, low-quality private workshops to make them. Of course, the cost is indeed reduced. However, in order to reduce the production cost, many small-scale workshops blindly reduce the materials of accessories. At the same time of installation, there is no way to guarantee the quality and repair This is also the case. When the customer pays off the full amount of payment, many manufacturers will choose not to give maintenance to customers because the cost calculation amount exceeds the standard. Therefore, it is very important to choose what kind of businesses.